WITRICITY WIRELESS POWER TRANSFER, ELECTRICITY TRANSMISSION CREATED IN 2007 FROM MIT RESEARCHERS
                       INTERNET'S BEST RESOURCE with EXPERIMENTAL VIDEOS, NEWS, HISTORY and INFORMATION!
 THE FUTURE OF TECHNOLOGY TODAY! http://www.witricitynet.com

WITRICITY

The Dream Of Nikola Tesla's Became True.
Scientists Managed To Power Up Small Devices In Electromagnetically Controlled Fields, Without Using Power Up Gadgets, Without Cables! They Transfered Electric Energy Into Them Using Transmission Cirquits! They Call It Witricity Or Etricity..

Friendly Websites
˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙

Witricity Related
˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙˙

Funny, Bizarre &
80s Music Videos!
Free Stuff!
E-Shop With MoneyBack
Funny-Bizarre VideoNews



 

Witricity
Electric Power Transmission
Wireless Energy Transfer
MIT Witricity Article
How To Create Witricity I
How To Create WitricityII
Coupled Magnetic Resonances

Details:
The MIT Created Witricity (Or Etricity), That Means An End To Multiple Gadgets That Powered Up Your Cellphone, Digital Cameras, Laptop, Or Any Other Electonic Machine At Anywhere Or Home!

Franklin Hadley, Institute for Soldier Nanotechnologies June 7, 2007 Imagine a future in which electricity transfer is feasible: cell phones, household robots, mp3 players, laptop computers and other portable electronics capable of charging themselves without ever being plugged in, freeing us from that final, ubiquitous power wire. Some of these devices might not even need their bulky batteries to operate.

A team from MIT's Department of Physics, Department of Electrical Engineering and Computer Science, and Institute for Soldier Nanotechnologies (ISN) has experimentally demonstrated an important step toward accomplishing this vision of the future.

The MIT team members that made the wireless electricity transmission cirquit are Andre Kurs, Aristeidis Karalis, Robert Moffatt, Prof. Peter Fisher, and Prof. John Joannopoulos (Francis Wright Davis Chair and director of ISN), led by Prof. Marin Soljacic.

Realizing their recent theoretical prediction, they were able to light a 60W light bulb from an electric source seven feet (more than two meters) away; there was no physical connection between the source and the appliance. The MIT team refers to its concept as "WiTricity" (as in wireless electricity). The work will be reported in the June 7 issue of Science Express, the advance online publication of the journal Science.

Late-night beeps The story starts one late night a few years ago, with Soljacic (pronounced Soul-ya-cheech) standing in his pajamas, staring at his cell phone on the kitchen counter. "It was probably the sixth time that month that I was awakened by my cell phone beeping to let me know that I had forgotten to charge it. It occurred to me that it would be so great if the thing took care of its own charging." To make this possible, one would have to have a way to transmit energy with no cables, so Soljacic started thinking about which physical phenomena could help make this wish a reality.

Radiation methods Various methods of transmitting power have been known for centuries. Perhaps the best known example is electromagnetic radiation, such as radio waves. While such radiation is excellent for transmission of information, it is not feasible to use it for electricity transmission. Since radiation spreads in all directions, a vast majority of power would end up being wasted into free space.

One can envision using directed electromagnetic radiation, such as lasers, but this is not very practical and can even be dangerous. It requires an uninterrupted line of sight between the source and the device, as well as a sophisticated tracking mechanism when the device is mobile.

The key: Magnetically coupled resonance In contrast, Witricity is based on using coupled resonant objects. Two resonant objects of the same resonant frequency tend to exchange energy efficiently, while interacting weakly with extraneous off-resonant objects. A child on a swing is a good example of this. A swing is a type of mechanical resonance, so only when the child pumps her legs at the natural frequency of the swing is she able to impart substantial energy.

Another example involves acoustic resonances: Imagine a room with 100 identical wine glasses, each filled with wine up to a different level, so they all have different resonant frequencies. If an opera singer sings a sufficiently loud single note inside the room, a glass of the corresponding frequency might accumulate sufficient energy to even explode, while not influencing the other glasses. In any system of coupled resonators there often exists a so-called "strongly coupled" regime of operation. If one ensures to operate in that regime in a given system, the energy transfer can be very efficient.

While these considerations are universal, applying to all kinds of resonances (e.g., acoustic, mechanical, electromagnetic, etc.), the MIT team focused on one particular type: magnetically coupled resonators. The team explored a system of two electromagnetic resonators coupled mostly through their magnetic fields; they were able to identify the strongly coupled regime in this system, even when the distance between them was several times larger than the sizes of the resonant objects. This way, efficient power transfer was enabled.

Magnetic coupling is particularly suitable for everyday applications because most common materials interact only very weakly with magnetic fields, so interactions with extraneous environmental objects are suppressed even further. "The fact that magnetic fields interact so weakly with biological organisms is also important for safety considerations," Kurs, a graduate student in physics, points out.

The investigated design consists of two copper coils, each a self-resonant system. One of the coils, attached to the electricity source, is the sending unit. Instead of irradiating the environment with electromagnetic waves, it fills the space around it with a non-radiative magnetic field oscillating at MHz frequencies. The non-radiative field mediates the power exchange with the other coil (the receiving unit), which is specially designed to resonate with the field. The resonant nature of the process ensures the strong interaction between the sending unit and the receiving unit, while the interaction with the rest of the environment is weak.

Moffatt, an MIT undergraduate in physics, explains: "The crucial advantage of using the non-radiative field lies in the fact that most of the power not picked up by the receiving coil remains bound to the vicinity of the sending unit, instead of being radiated into the environment and lost." With such a design, power transfer has a limited range, and the range would be shorter for smaller-size receivers.

Still, for laptop-sized coils, power levels more than sufficient to run a laptop can be transferred over room-sized distances nearly omni-directionally and efficiently, irrespective of the geometry of the surrounding space, even when environmental objects completely obstruct the line-of-sight between the two coils. Fisher points out: "As long as the laptop is in a room equipped with a source of such wireless power, it would charge automatically, without having to be plugged in. In fact, it would not even need a battery to operate inside of such a room." In the long run, this could reduce our society's dependence on batteries, which are currently heavy and expensive.

At first glance, such a power transfer is reminiscent of relatively commonplace magnetic induction, such as is used in power transformers, which contain coils that transmit power to each other over very short distances. An electric current running in a sending coil induces another current in a receiving coil. The two coils are very close, but they do not touch. However, this behavior changes dramatically when the distance between the coils is increased. As Karalis, a graduate student in electrical engineering and computer science, points out, "Here is where the magic of the resonant coupling comes about. The usual non-resonant magnetic induction would be almost 1 million times less efficient in this particular system."

Old physics, new demand Witricity is rooted in such well-known laws of physics that it makes one wonder why no one thought of it before. "In the past, there was no great demand for such a system, so people did not have a strong motivation to look into it," points out Joannopoulos, adding, "Over the past several years, portable electronic devices, such as laptops, cell phones, iPods and even household robots have become widespread, all of which require batteries that need to be recharged often."

As for what the future holds, Soljacic adds, "Once, when my son was about three years old, we visited his grandparents' house. They had a 20-year-old phone and my son picked up the handset, asking, 'Dad, why is this phone attached with a cord to the wall?' That is the mindset of a child growing up in a no-cables world. My best response was, 'It is strange and awkward, isn't it? Hopefully, we will be getting rid of some more wires, and also batteries, soon.'"

This work was funded by the Army Research Office (Institute for Soldier Nanotechnologies), National Science Foundation and the Department of Energy.

Witricity In History

In 1825 William Sturgeon invented the electromagnet, a conducting wire wrapped around an iron core. The principle of EM induction — that a changing magnetic field can induce an electrical current in an adjacent wire — was discovered by Michael Faraday in 1831. Combining these two discoveries, Nicholas Joseph Callan was the first to demonstrate the transmission and reception of electrical energy without wires. Callan’s 1836 induction coil apparatus consisted of two insulated coils — called the primary and secondary windings — both placed around a common iron core. A battery intermittently connected to the primary would ‘induce’ a voltage in the longer secondary causing a spark to jump across its free terminals.

In an induction coil or electrical transformer, which can have either an iron core or an air core, the transmission of energy takes place by simple electromagnetic coupling through a process known as mutual induction. With this method it is possible to transmit and receive energy over a considerable distance. However, to draw significant power in that way, the two inductors must be placed fairly close together.

If resonant coupling is used, where inductors are tuned to a mutual frequency, significant power may be transmitted over a range of many meters.

In 1864 James Clark Maxwell mathematically modeled the behavior of electromagnetic radiation. Some early work in the area of energy transmission via radio waves was done in 1888 by Heinrich Hertz who performed experiments that validated Maxwell’s mathematical model. Hertz’s apparatus for generating electromagnetic waves is generally acknowledged as the first radio transmitter. A few years later Guglielmo Marconi worked with a modified form of the Hertz-wave transmitter, the main improvement being the addition of an elevated conductor and a ground connection. Both of these elements can be traced back to the 1749 work of Benjamin Franklin and that of Mahlon Loomas in 1864.

Nikola Tesla also investigated radio transmission and reception but unlike Marconi, Tesla designed his own transmitter — one with power-processing capability some five orders-of-magnitude greater than those of its predecessors. He would use this same coupled-tuned-circuit oscillator to implement his conduction-based energy transmission method as well. Both of these no-cables methods employ a minimum of four tuned circuits, two at the transmitter and two at the receiver.

As wireless technologies were being developed during the early 1900s, researchers further investigated these different transmission methods. The goal was simply to generate an effect locally and detect it at a distance. Around the same time, efforts began to power more significant loads than the high-resistance sensitive devices that were being used to simply detect the received energy. At the St. Louis World's Fair (1904), a prize was offered for a successful attempt to drive a 0.1 horsepower (75 W) air-ship motor by energy transmitted through space at a distance of least 100 feet (30 m).

Except for RFID tags, power transmission over room-sized or community-sized distances has not been widely implemented. Rightly or not, it has been assumed by some that any system for broadcasting energy to power electrical devices will have negative health implications. With focused beams of microwave radiation there are definite health and safety risks. Considering the hazards associated with powerful radiation, the physical alignment and targeting of devices to receive the energy beam is of particular concern. However with the use of resonant coupling, wavelegnths produced are far lower making it no more dangerous than being exposed to radio waves.

>> Next Page: Read Also: How Wireless Electricity Transmission Already Affects Our Life..

 ...Or Slide Down The Page To Add Your Comments And Join Our Chat Room Discussions!

• Add Your Comments!

 Free shoutbox @ ShoutMix

• NEW!  Our Chat Room! (appears only in internet explorer).
Exchange your visions, your opinion and interact with other visitors..

Copyright © 2007,2008 www.witricitynet.com All Rights Reserved.
      contact@witricitynet.com